JMP Philippines, supplier of packaging products desiccants, dunnage air bags, bulk container liners, stretch film, plastic pallets

BLC Flexitanks



BLC P4 Flexi Fully Loaded

P4 Flexitank

P4 Fully Loaded


The BLC ‘P4 Tank’ is produced using few multilayers of PE film with a woven PP outer, which gives excellent tensile strength and a good tolerance to temperature fluctuations. This Flexitank is suitable for single use on a wide range of industrial and food grade products and all contact layers are European and FDA approved.

It is available in various capacities ranging from 16 to 24 cubic meters (or custom made to a customer specific requirements).

All of which can be fitted into a standard 20ft ISO container.

To facilitate the loading and discharging procedure this Flexitank comes fully fitted with a standard 2 & 3 inch (50.8 & 76.2 mm) hose complete with valve and cap. We also supply 2 & 3 inch stubbies as well as 2 & 3 inch bottom loader as an alternative to the loading hose.

Base Fabric Four Ply Triple Co-extrusion
Polyethylene Liner
(125 micron for each ply) 
Weight
50 kgs (790 gsm) 
Tensile Strength TD (ASTM D 882) 30 MPa 
Tensile Strength MD (ASTM D 882) 35 MPa
Tear Resistance TD (ASTM D 1922)
10 g / µm
Tear Resistance MD (ASTM D 1922) 30 g / µm
Puncture Resistance / Dart Impact
(ASTMD 1709)
> 1200 g
Elongation MD (ASTM D882)
550% 
Elongation TD (ASTM D882) 650%
Extreme working temperature -25 oC  / +70 oC 

Sealing Process Each liner tested for quality
 
FURTHER INFORMATION (click on images)

Bulkheads

Accessories

Standard Operating Procedure

BLC Bulkheads BLC Accessories Standard Operating Procedure

Return to Previous 
Page

Should you have any questions regarding Flexitanks please contact JMP Philippines
 
Copyright © 2008 JMP PhilippinesPrivacy Policy | Contact | Home